Hospital Bed

Manual Patient Hospital Bed with Integrated Bedside Functions

This manual patient hospital bed is designed for care environments where reliable mechanical positioning and practical everyday features are equally important. The two-crank system provides independent backrest and leg adjustment, while several integrated components help reduce the need for additional equipment around the bed.

A flip-over dining table provides a convenient surface for meals and daily activities, while a hydraulic damping mechanism allows the table to lower smoothly when it is folded away. The bed also features 148 cm curved folding side rails, a central locking caster system and a large under-bed storage rack for frequently used patient belongings and appropriate care supplies.

Simple Two-Crank Positioning without Electrical Dependence

Manual Backrest Adjustment

The first crank controls the back section of the mattress platform. Caregivers can raise the patient's upper body from a flat lying position toward a more upright posture for meals, reading, communication and other activities performed from the bed.

Manual Leg Adjustment

The second crank operates the leg section independently, providing an additional positioning option according to the patient's resting and care requirements.

Both functions use mechanical operation rather than electric actuators. This keeps the positioning system straightforward and allows the bed to remain fully functional without relying on a power outlet, motor or electronic control system.

Flip-Over Dining Table Integrated into the Bed

A Practical Surface When the Patient Needs It

One of the most distinctive features of this model is its integrated flip-over table. Instead of positioning a separate mobile table beside the bed, the table forms part of the bed structure and can be raised directly into a horizontal working position.

It provides a convenient surface for eating, reading and other appropriate bedside activities, keeping frequently used functions close to the patient.

Fold It Away When It Is Not Required

After use, the table can be folded down toward the foot end of the bed. This allows the bedside area to remain open instead of leaving a separate overbed table occupying floor space when it is not needed.

For smaller patient rooms and environments where efficient use of space is important, this integrated arrangement provides a practical alternative to adding another piece of movable bedside furniture.

Hydraulic Soft-Lowering Mechanism

Controlled Movement Instead of Sudden Dropping

The folding table incorporates a hydraulic damping mechanism to control its downward movement. When the table is released from the working position, the damping system supports a slower and smoother descent rather than allowing the table to drop abruptly.

This improves handling for caregivers and makes repeated folding and unfolding more controlled during everyday use.

Large Under-Bed Storage for Better Space Utilization

More Than a Small Accessory Basket

A large open metal storage rack is positioned beneath the mattress platform. The rack extends across a substantial portion of the lower bed frame, providing significantly more usable space than a small conventional accessory basket.

Suitable patient belongings, bedding or frequently required care supplies can be kept closer to the bed without occupying additional floor space around the patient area.

Making Use of Otherwise Empty Space

Storage capacity is often overlooked when comparing hospital beds, yet it can become important when a patient remains in the same room for an extended period. Using the area beneath the bed helps keep the surrounding environment more organized while making practical use of space that would otherwise remain unused.

The combination of the integrated table and large lower storage rack makes this Hospital Bed particularly useful where buyers want to reduce dependence on separate bedside accessories.

148 cm Curved Folding Side Rails

Extended Coverage Along the Patient Area

The bed is equipped with curved folding side rails measuring approximately 148 cm in length. Their extended design provides broad coverage along the side of the mattress while the curved profile gives the bed a more refined appearance than traditional straight-bar rail structures.

Fold Down for Direct Bedside Access

When caregivers need closer access for patient transfer, bedding changes or other nursing procedures, the rails can be folded down to open the side of the mattress platform.

After the required task has been completed, the rails can be returned to the raised position to provide bedside protection.

Central Locking Caster System

Easier Movement and Positioning

The mobile base uses a central locking system rather than relying solely on individually operated caster brakes. When the bed needs to be moved for room cleaning, patient care or repositioning, the caster system allows convenient mobility.

After the bed reaches the required position, the centralized braking mechanism provides a more efficient way to secure the mobile base without individually locking each wheel.

Stamped Steel Platform for Reliable Mattress Support

Integrated Steel Surface Instead of Wire Mesh

The mattress platform is manufactured from stamped steel sections rather than a welded wire-mesh structure. The formed steel surface provides stable support beneath the mattress and is suitable for repeated use in professional healthcare environments.

Ventilation openings are integrated into the platform to support airflow beneath the mattress while maintaining a practical surface for routine cleaning and maintenance.

Detachable ABS Head and Foot Boards

ABS head and foot boards provide a clean medical appearance suitable for hospital and patient care environments. Their smooth molded surfaces are practical for routine maintenance, while the detachable design allows removal when required.

Why Choose This Model Instead of a Basic Two-Crank Bed?

A conventional two-crank hospital bed usually focuses primarily on backrest and leg positioning. For buyers looking only for those functions, a basic manual model may be sufficient.

This bed is designed for situations where additional everyday convenience is required without moving to an electric positioning system. Its value comes from integrating several practical functions directly into the bed.

For the Patient

The flip-over table provides a readily available surface for meals and daily activities, while the long curved rails provide side protection during normal bed use.

For the Caregiver

Hydraulic table damping, folding rails and central braking simplify frequently repeated operations around the bed.

For Room Organization

The large under-bed storage rack provides useful storage capacity, while the integrated table reduces the need for an additional movable overbed table.

For Maintenance

The manual two-crank positioning system does not depend on electric motors or electronic controls, providing a straightforward option for buyers who prioritize simple operation and maintenance.

A Well-Equipped Manual Bed for Different Patient Care Environments

This model is suitable for hospitals, community healthcare facilities, rehabilitation centers, clinics and other patient care environments where mechanical reliability and practical bedside features are important.

For distributors and healthcare equipment buyers, it also provides a differentiated manual model positioned above basic two-crank beds without requiring the electrical system of a fully powered hospital bed.

Buyers can explore additional manual and electric models in our Hospital Bed range or contact us for specifications, bulk purchasing, accessory configuration and OEM/ODM requirements.