heyuan962568@gmail.com
+86 18730808985
Hebei, China
Phone: +86 18730808985
Email: heyuan962568@gmail.com
Contact: zihao zu — Sales Director
A care bed used for months or years becomes part of the living environment rather than simply a piece of medical equipment. This premium electric home care bed is designed with that distinction in mind, combining professional five-function positioning with an ultra-low height range, four independently adjustable side rails and a coordinated wood-finish exterior.
The mattress platform can be lowered to approximately 23 cm for a low-level resting position and raised to approximately 70 cm when caregivers require easier bedside access. Four individual side rail sections provide extensive protection while allowing selected areas of the bed to be opened according to daily care needs.
This combination makes the model particularly suitable for elderly home care, assisted living, residential rehabilitation and long-term care environments where functionality, protection and room appearance all influence product selection.
The mattress platform can descend to approximately 23 cm from floor level. This creates a significantly lower sleeping position than a conventional fixed-height care bed and provides additional flexibility when arranging the room for an elderly user.
For users with reduced mobility or an increased risk of falling from bed, a lower mattress position can be considered together with appropriate supervision, side protection and other individual care measures.
The advantage of an electrically adjustable bed is that this low position does not have to become the permanent working height of the caregiver.
When personal care, bedding changes, repositioning or other bedside assistance is required, the complete mattress platform can be raised electrically to approximately 70 cm.
This allows the caregiver to bring the user closer to a practical working level before beginning the task and return the bed to a lower position afterward.
The wide adjustment range allows the same bed to serve very different stages of the daily care routine. Instead of choosing between a permanently low bed and a conventional higher care bed, users and caregivers can benefit from both positions in one platform.
The four-section side protection system is one of the defining features of this model. Two rail sections are positioned on each side of the mattress platform, creating extensive coverage around the sleeping area.
Each rail section can be operated separately. This means the caregiver does not necessarily need to lower an entire side of the bed when access is required.
When closer access to the upper body is needed, the relevant rail section can be lowered while other sections remain in position.
When preparing for assisted movement or transfer, caregivers can adjust the appropriate rail according to the access required around the mattress platform.
Because the four rails operate independently, protection can remain in place around areas where direct access is not currently required.
Compared with beds using only short upper-body rails, the four-section layout provides protective coverage across a larger proportion of the mattress sides. This makes the configuration particularly relevant to long-term elderly care environments where bedside protection is an important consideration.
The backrest can be raised electrically when the user wants to eat, read, communicate, watch television or spend time in a more upright position.
The knee section can be adjusted independently and combined with the backrest to create different supported positions according to individual requirements.
The complete sleeping platform moves electrically between approximately 23 cm and 70 cm, allowing bed height to change according to the activity taking place.
The entire platform can be electrically tilted into a Trendelenburg position, providing an additional whole-bed positioning option where required by the care setting.
Reverse Trendelenburg allows the complete platform to tilt in the opposite direction, completing the five-function electric configuration.
The appearance of this model is intentionally different from a conventional clinical hospital bed. Large wood-finish head and foot panels create a furniture-inspired profile, while matching wood-style elements are incorporated into the tops of the four side rails.
The wooden elements are visually repeated across the headboard, footboard and side protection system. This gives the complete bed a more unified appearance rather than making the wooden panels look like decorative components added to a conventional medical frame.
The warmer exterior can coordinate more naturally with bedside cabinets, wardrobes and other residential furniture. This is particularly valuable in environments where the user spends an extended period in the same room.
For buyers searching for a professional Nursing Bed without the strongly institutional appearance of traditional hospital equipment, this design provides a more residential alternative.
Side rails are important in elderly care, but more protection does not mean that every rail should remain raised in every situation. Different users have different mobility, transfer and supervision requirements.
The independently adjustable four-section design allows the bedside configuration to be adapted according to individual care needs rather than treating all users in the same way.
Where appropriate, multiple rail sections can remain raised to provide more extensive bedside coverage.
Selected sections can be lowered when caregivers need direct access to the user.
The required section can be opened according to the user's mobility and transfer plan while other protective sections remain available.
The five electric functions provide flexibility for users requiring frequent positioning and caregiver assistance over extended periods.
The residential-style exterior is suitable for environments that combine independent living with access to professional care support.
For facilities seeking to move away from conventional institutional room design, the coordinated wooden exterior provides a warmer alternative without removing professional electric functionality.
Electric backrest, knee-rest and height adjustment allow the bed configuration to change as positioning and assistance requirements evolve during longer recovery periods.
For distributors, the combination of a 23–70 cm height range and four independent side rails provides clear differentiation from conventional electric home care beds with shorter side protection or more limited height adjustment.
Two electric care beds can share the same approximate 23–70 cm height range and still address different purchasing priorities. Minimum and maximum height alone do not determine the complete specification of a long-term care bed.
The four independently adjustable rail sections create broader bedside coverage and allow localized access during care. This gives the model a different safety and caregiver-access configuration from more basic low-height beds.
Wood-finish elements across the headboard, footboard and rail tops give the complete product a coordinated furniture-inspired appearance. For residential elderly care projects, this can be an important distinction.
This model is therefore best positioned not simply as another ultra-low electric bed, but as a higher-specification care solution combining wide height adjustment, extensive side protection and a more refined residential appearance.
Premium electric 5-function low-height care bed.
Approximately 230 mm from floor level.
Approximately 700 mm from floor level.
Approximately 470 mm between the minimum and maximum positions.
Electric upper-body positioning.
Electric lower-body positioning.
Electric whole-bed height adjustment.
Electric Trendelenburg and reverse Trendelenburg positioning.
Four independently adjustable side rail sections, with two rails positioned on each side of the bed.
Coordinated wood-finish headboard, footboard and side rail tops.
Home care, assisted living, elderly residential care, rehabilitation and long-term care environments.
This electric care bed combines professional positioning with features designed specifically for long-term living. Its approximately 23 cm low position provides a reduced sleeping height, while the approximately 70 cm high position gives caregivers greater flexibility when providing hands-on assistance.
Four independently adjustable side rails extend protection along both sides of the mattress while allowing selected areas to be opened for care and assisted mobility. Five electric functions provide flexible positioning throughout the day, while the coordinated wooden exterior helps the bed integrate into a more comfortable residential environment.
For buyers looking for a higher-specification electric home care bed that balances user protection, caregiver accessibility and residential design, this model provides a distinctly different option from conventional clinical nursing beds.
For OEM configurations, project quantities, product specifications or distributor cooperation, please contact us for further information.
The nursing beds meet our daily care requirements very well. The products arrived in good condition, and the overall purchasing experience was smooth and professional.
We were looking for a supplier that could provide stable quality and flexible OEM service. Their responsiveness and product consistency have helped us grow our business.
The care beds are comfortable, easy to operate, and well received by both residents and caregivers. The team provided helpful support throughout the purchasing process.
We have purchased care beds for several projects, and the product quality has been consistent. Communication was clear, and delivery was arranged on schedule. A reliable supplier to work with.
Yes. We provide OEM and ODM services for care beds, nursing beds, and healthcare furniture, including customization of functions, colors, logos, packaging, and specifications.
Our products are manufactured under ISO 9001 and EN ISO 13485 quality management systems. Specific certifications may vary depending on the product model and market requirements.
Production time depends on the product type and order quantity. Most standard care bed orders can be arranged within the agreed production schedule.
MOQ varies by product model. Please contact us with your requirements, and we will recommend the most suitable purchasing solution.
Yes. We provide product guidance, technical documentation, and responsive after-sales support to help customers use and maintain our care beds efficiently.
Send us your requirements today and receive fast support, product details, and factory pricing within 24 hours.
+86 18730808985
Mon-Fri, 8am-6pm CST
heyuan962568@gmail.com
We reply within 24 hours
+86 18730808985
Instant messaging available
Yintai Industrial Park, Jizhou District, Hengshui City, Hebei Province, China
