Shower Chairs

Removable Bath Board for Home Bathing

Removable Bath Board for Home Bathing

Phone: +86 18730808985

Email: heyuan962568@gmail.com

Contact: zihao zu — Sales Director

Removable Bath Board for Home Bathing

This removable bath board is designed to provide a convenient seated bathing surface for compatible household bathtubs. It features a white polyethylene (PE) seating panel, an aluminum alloy support frame and four rubber-covered contact ends.

The board rests across the bathtub edges through an adjustable support structure, providing a seating arrangement without requiring conventional floor-standing shower chair legs. Its removable design allows the board to be taken off the bathtub when it is not needed, making it suitable for residential bathrooms and home bathing assistance applications.

The PE seat incorporates multiple drainage holes to allow water to pass through during bathing. The lightweight aluminum alloy frame and adjustable support components provide a practical configuration for home care equipment suppliers, bathroom assistance product distributors and international B2B buyers.

Removable Bathing Seat for Residential Bathtubs

The bath board is designed to rest horizontally across compatible bathtub edges, creating a seating surface above the bathtub interior.

Over-Bathtub Seating Arrangement

The aluminum alloy support rails extend beyond the seating panel and rest on both sides of the bathtub rim. This arrangement provides a dedicated seated bathing surface without adding four separate floor-standing legs.

Convenient Removal When Not in Use

The board can be removed from the bathtub when it is not required for bathing. This allows households to use the bathtub without leaving the bathing accessory permanently installed.

Flexible Bathroom Arrangement

The removable construction provides greater flexibility for residential bathrooms where different family members may have different bathing preferences.

Compact Product Configuration

The product combines a compact seating panel with an aluminum alloy support assembly, making it convenient to handle and store separately when not in use.

Adjustable Support Structure for Household Bathtubs

The underside of the bath board incorporates adjustable aluminum alloy rails and mechanical fastening components.

Adjustable Support Rails

The support rails can be repositioned to change the distance between the bathtub contact points. This allows the board to be configured for different compatible bathtub dimensions.

Positioning Holes and Fastening Hardware

The adjustment assembly incorporates positioning holes and metal fastening components to secure the selected configuration.

Appropriate tools may be required for adjustment or assembly, depending on the supplied configuration.

Bathtub Size Compatibility

The adjustable structure is designed to accommodate different bathtub dimensions within its verified adjustment range.

Before purchasing, the bathtub width and available rim support surfaces should be checked against the manufacturer's confirmed specifications.

PE Seat with Drainage Holes for Daily Bathing

The seating panel is manufactured from polyethylene (PE) and features a white rectangular design with rounded corners.

Water-Resistant PE Seating Surface

The molded PE panel provides a water-resistant seating surface suitable for regular bathroom use. It can be rinsed after bathing and maintained according to the manufacturer's cleaning instructions.

Multiple Drainage Openings

Multiple drainage holes are distributed across the seating panel to allow shower water to pass through during bathing.

This design helps reduce water accumulation on the seating surface and makes routine rinsing more convenient.

Rounded Edges and Compact Dimensions

The seat features rounded corners and a smooth outer profile. The indicated seating panel dimensions are approximately 41 cm in length and 22 cm in width.

Aluminum Alloy Frame for Bathroom Environments

The main supporting structure is constructed from aluminum alloy tubing, providing a relatively lightweight frame for residential bathing equipment.

Lightweight Tubular Construction

The aluminum alloy rails connect the seating panel with the bathtub contact points, forming the primary supporting structure.

Resistance to Normal Bathroom Moisture

Aluminum alloy offers resistance to corrosion under normal moisture exposure, making it suitable for bathroom equipment applications.

Mechanical Connection Components

The underside structure incorporates metal fastening components and adjustment points that connect and secure the support rails.

Rubber-Covered Ends for Bathtub Contact

The four exposed ends of the support rails are fitted with textured rubber covers designed to contact suitable bathtub rim surfaces.

Textured Rubber Contact Surfaces

The ribbed rubber covers are intended to improve friction between the support ends and compatible bathtub surfaces.

Protection for Bathtub Surfaces

The rubber coverings help reduce direct metal contact with the bathtub, minimizing the possibility of scratches and surface marks during positioning and removal.

Four-Point Contact Configuration

The four rubber-covered ends form the supporting interface between the board and the bathtub rim.

All four contact points must be positioned correctly on suitable supporting surfaces before use.

Easy Cleaning and Everyday Maintenance

Regular cleaning is an important consideration for bathroom assistance equipment used in residential environments.

Rinsing the PE Seat

The PE seating panel can be rinsed after bathing. The drainage holes should be kept clear of accumulated dirt and debris.

Cleaning the Support Frame

The aluminum alloy rails and rubber-covered contact ends can be cleaned according to the manufacturer's maintenance instructions.

Accessible Mechanical Components

The adjustable support assembly and fastening components can be inspected during routine cleaning and maintenance.

Periodic Component Inspection

Check the adjustment hardware, support rails and rubber end covers periodically for looseness, damage or wear. Any damaged components should be addressed before further use.

Technical Specifications

General Product Information

  • Product Name: Removable Bath Board for Home Bathing
  • Product Type: Bathtub Bath Board
  • Primary Application: Residential Seated Bathing Assistance
  • Installation: Removable Over-Bathtub Design
  • Seat Material: PE (Polyethylene)
  • Frame Material: Aluminum Alloy
  • Seat Color: White
  • Frame Finish: Silver
  • Support End Material: Textured Rubber
  • Seat Design: Rectangular with Rounded Corners
  • Drainage: Multiple Integrated Drainage Holes

Dimensions and Adjustment

  • Seat Panel Length: Approximately 41 cm
  • Seat Panel Width: Approximately 22 cm
  • Indicated Overall Adjustable Length: Approximately 71–81.5 cm, subject to confirmation

Structural Configuration

  • Aluminum Alloy Tubular Support Rails
  • Adjustable Mechanical Support Assembly
  • Four Rubber-Covered Contact Ends
  • PE Seating Panel with Drainage Holes
  • Metal Fastening Components
  • Removable Over-Bathtub Construction

Applications in Home Care and Residential Bathrooms

Home Bathtub Bathing

The bath board provides a removable seating surface for compatible household bathtubs, offering an alternative to standing during bathing.

Elderly Home Care

The product can be considered for elderly users who require a suitable seated bathing arrangement and have been assessed as compatible with this type of bathtub support aid.

Residential Bathroom Assistance

Home care equipment suppliers can include this removable bath board in their bathroom assistance product ranges alongside shower chairs, bath seats and other personal bathing accessories.

Bathroom Equipment Distribution

Medical equipment importers and home care distributors can offer this product to customers seeking removable bathing aids for residential bathrooms.

Installation and Use Considerations

Measure the Bathtub Before Installation

Check the bathtub width, rim shape and available supporting surfaces before positioning the board. Confirm that the support structure can accommodate the required dimensions.

Secure the Adjustable Support Rails

Adjust the support assembly to the appropriate position and secure the mechanical fastening components according to the manufacturer's instructions.

Check the Four Contact Ends

Ensure that all four rubber-covered ends rest correctly on the bathtub rim. The board should be checked for movement before use.

Confirm the Manufacturer's Load Rating

The maximum permitted load should be verified from the manufacturer's final technical specification before the product is used.

Removable Bath Board Manufacturer and B2B Wholesale Supplier

Hebei Heyuan Medical Equipment Co., Ltd. is a medical equipment manufacturer in China with approximately 20 years of manufacturing experience.

Our product range includes bath boards, shower chairs, shower commode chairs, hospital beds, nursing beds, patient transfer equipment and related medical furniture.

We provide OEM/ODM manufacturing services and B2B wholesale supply solutions for international home care equipment distributors, bathroom assistance suppliers, medical equipment importers and institutional purchasing projects.

Explore our Shower Chairs collection for additional bathing assistance products.

For product specifications, bathtub compatibility details, wholesale quotations and OEM/ODM cooperation, please contact our sales team.

Emma Rodriguez

Emma Rodriguez

Rehabilitation Center Manager

The nursing beds meet our daily care requirements very well. The products arrived in good condition, and the overall purchasing experience was smooth and professional.

David Miller

David Miller

Healthcare Equipment Distributor

We were looking for a supplier that could provide stable quality and flexible OEM service. Their responsiveness and product consistency have helped us grow our business.

Sarah Williams

Sarah Williams

Nursing Home Director

The care beds are comfortable, easy to operate, and well received by both residents and caregivers. The team provided helpful support throughout the purchasing process.

Michael Thompson

Michael Thompson

Purchasing Manager

We have purchased care beds for several projects, and the product quality has been consistent. Communication was clear, and delivery was arranged on schedule. A reliable supplier to work with.

Yes. We provide OEM and ODM services for care beds, nursing beds, and healthcare furniture, including customization of functions, colors, logos, packaging, and specifications.

Our products are manufactured under ISO 9001 and EN ISO 13485 quality management systems. Specific certifications may vary depending on the product model and market requirements.

Production time depends on the product type and order quantity. Most standard care bed orders can be arranged within the agreed production schedule.

MOQ varies by product model. Please contact us with your requirements, and we will recommend the most suitable purchasing solution.

Yes. We provide product guidance, technical documentation, and responsive after-sales support to help customers use and maintain our care beds efficiently.

Ready to Discuss Your Project?

Send us your requirements today and receive fast support, product details, and factory pricing within 24 hours.

Call Us

+86 18730808985

Mon-Fri, 8am-6pm CST

Email Us

heyuan962568@gmail.com

We reply within 24 hours

WhatsApp

+86 18730808985

Instant messaging available

Our Address

Yintai Industrial Park, Jizhou District, Hengshui City, Hebei Province, China


Code
Chat with us!