How Can a Patient Transfer Trolley Carry an Oxygen Cylinder and IV Pole Together?
How Can a Patient Transfer Trolley Carry an Oxygen Cylinder and IV Pole Together?
When hospitals and professional care facilities purchase patient transfer trolleys, they usually compare height adjustment, safe working load, side rails and caster dimensions. These specifications are important, but they do not describe everything that may need to move with a patient during transportation.
Some patients require prescribed oxygen support or intravenous therapy while being transported between appropriate care areas. A patient transfer trolley with oxygen cylinder holder and IV pole provides designated mounting and storage arrangements for compatible supporting equipment.
The HEYUAN JH-PC101 Hydraulic Patient Transfer Trolley incorporates an integrated oxygen cylinder tray with a published 20kg load capacity, one standard IV pole, four IV pole sockets and a designated pole storage holder. These components are combined with dual hydraulic height adjustment, central braking, large medical casters and a retractable fifth wheel.
For healthcare equipment distributors, rehabilitation project contractors and hospital procurement departments, the key question is whether these accessories are properly positioned, compatible with the intended equipment and suitable for the planned patient transport procedure.
A patient transfer trolley should not be selected solely because its product photograph shows an oxygen cylinder or IV pole. Buyers need to confirm the actual mounting structure, approved accessory loads and the available clearance during movement.
How the Integrated Oxygen Cylinder Holder Is Arranged
The JH-PC101 includes a dedicated lower storage tray intended for compatible oxygen cylinders. The published tray load capacity is 20kg.
Lower Chassis Storage
Integrated Position
The oxygen cylinder tray is incorporated into the lower portion of the trolley structure rather than provided as an unrelated floor-standing accessory.
Defined Carrying Location
The designated tray provides a specified place for an approved oxygen cylinder during suitable patient transport procedures.
Separate from the Patient Platform
The oxygen cylinder support is located below the main patient-supporting surface.
Actual Mounting Geometry
Buyers should request photographs and drawings showing the tray's position relative to the hydraulic frame, casters and other lower components.
Understanding the 20kg Capacity
Published Load Rating
HEYUAN specifies a maximum tray load of 20kg for the JH-PC101.
Complete Cylinder Weight
The total carried weight includes the cylinder and relevant installed accessories, subject to the manufacturer's approved configuration.
Not a Universal Cylinder Size
A 20kg tray capacity does not establish compatibility with every oxygen cylinder weighing less than that amount.
Separate from Patient Load
The oxygen tray's 20kg rating should not be confused with the trolley's published 320kg safe working load.
What Determines Oxygen Cylinder Compatibility?
Cylinder Diameter
The available supporting space must be compared with the diameter of the intended cylinder.
Cylinder Length
The cylinder must fit the designated arrangement without interfering with surrounding components.
Securing Method
Buyers should confirm how the cylinder is restrained against unintended movement during transport.
Valve and Regulator Protection
Any fitted regulator and valve must remain protected and accessible according to the applicable cylinder and facility requirements.
Manufacturer Approval
The intended oxygen cylinder configuration should be checked against the trolley manufacturer's operating instructions.
Why an Oxygen Cylinder Tray Needs More Than a Weight Rating
The mechanical design of a cylinder support is important because the trolley moves, changes height and may pass through different treatment areas.
Secure Retention During Movement
Designated Cylinder Position
The cylinder should remain in the location approved by the manufacturer.
Retention Components
Any straps, brackets or other securing devices should be identified in the final supplied configuration.
Movement Restrictions
The cylinder must not be allowed to shift into moving mechanical assemblies.
Inspection Before Transport
Authorized personnel should confirm that the cylinder and its approved securing components are correctly positioned.
Lower Frame Clearance
Hydraulic Mechanisms
The JH-PC101 uses a dual hydraulic height-adjustment system that must remain clear of attached accessories.
Moving Linkages
Buyers should assess whether the mounted oxygen equipment interferes with any moving parts.
Floor Clearance
The cylinder and support arrangement must not extend into an area prohibited by the operating instructions.
Height Adjustment Test
The complete system should be checked at both the minimum and maximum approved platform heights.
Oxygen Equipment Is Not Included by Implication
Tray Versus Cylinder
The published standard equipment confirms an oxygen cylinder tray, not the supply of a filled oxygen cylinder.
Regulator Selection
Compatible regulators and related components must be specified separately where required.
Clinical Oxygen Requirements
Oxygen delivery arrangements should be determined by the appropriate healthcare professionals.
Quotation Accuracy
Distributors should clearly distinguish the included tray from any separately purchased oxygen equipment.
One IV Pole, Four Sockets and a Dedicated Storage Holder
The JH-PC101 includes a practical infusion-support arrangement: one supplied IV pole, four designated sockets and a separate storage location for the pole.
Standard IV Pole
Included Quantity
One IV pole is included in the standard JH-PC101 configuration.
Designated Supporting Function
The pole provides a mounting point for compatible infusion equipment within its approved operating limits.
Actual Material and Dimensions
Buyers should request the IV pole material, height range and relevant diameter specifications.
Approved Load
The permitted loading of the IV pole and its hooks should be confirmed before use.
Four IV Pole Sockets
Multiple Mounting Locations
The trolley incorporates four standard IV pole sockets.
Position Selection
The available sockets allow the pole location to be selected according to the approved equipment arrangement.
Socket Compatibility
The supplied pole must fit the corresponding mounting sockets correctly.
Retaining Mechanism
Buyers should verify how the pole is retained in an installed position.
Dedicated IV Pole Storage Holder
Storage When Not Required
A separate holder is provided for storing the IV pole when it is not installed in a working socket.
Reduced Loose Equipment
The designated storage arrangement avoids relying on an improvised location for the removed pole.
Movement Clearance
The stored pole must remain clear of the trolley's moving and steering components.
Actual Storage Orientation
The manufacturer should demonstrate how the pole fits into its storage holder.
Choosing the Correct IV Pole Position During Patient Transport
Having four pole sockets does not mean every location is suitable for every transport situation. The correct position depends on the equipment arrangement and approved procedure.
Head-End Positioning
Available Space
The pole should be positioned without obstructing caregiver movement or the trolley's designated handling points.
Patient Access
The arrangement must allow appropriate access to the patient and connected equipment.
Backrest Movement
The IV pole and tubing should remain clear of the approved backrest adjustment.
Actual Socket Position
Buyers should identify the designated head-end sockets on the production model.
Foot-End Positioning
Alternative Location
Another socket may be selected when the approved care arrangement requires a different pole position.
Caregiver Handling
The pole must not obstruct the intended pushing or steering procedure.
Surrounding Equipment
Nearby beds, furniture and medical devices should be considered when selecting the pole location.
Tubing Management
Clinical staff must manage infusion lines according to the applicable treatment and transport procedures.
Why Pole Position Matters in Narrow Routes
External Projections
An installed pole and associated equipment may extend beyond the trolley's basic frame dimensions.
Doorway Clearance
The complete equipment arrangement should be checked against the available passage width.
Elevator Clearance
The selected pole position and height may affect the space required during approved elevator transport.
No Assumed Universal Fit
The presence of four mounting sockets does not guarantee that every pole location will suit every doorway or corridor.
How the Accessories Work with Hydraulic Height Adjustment
The JH-PC101 incorporates two hydraulic cylinders for overall height adjustment from approximately 630mm to 930mm.
Preparing the Transfer Height
Minimum Published Height
The trolley's lower platform position is approximately 630mm.
Maximum Published Height
The upper platform position is approximately 930mm.
Bedside Alignment
The supporting surface can be adjusted to an appropriate position before an approved patient transfer.
Accessory Clearance
The installed oxygen holder, IV pole and associated equipment should be evaluated throughout the permitted height range.
Oxygen Tray Relationship
Lower Chassis Position
The oxygen holder is integrated into the trolley's lower structural assembly.
Moving Components
The hydraulic mechanism must remain clear of the cylinder, securing accessories and related equipment.
Complete Movement Check
Buyers should observe the arrangement during height adjustment under safe manufacturer-prescribed conditions.
IV Pole Relationship
Installed Pole
The pole must remain correctly secured in an approved socket.
Changing Platform Height
Staff should assess any associated tubing or equipment arrangement when the patient platform is raised or lowered.
Stored Pole
The designated storage position should also be checked for interference.
Operating Limitations
Any restrictions on height adjustment while accessories are fitted must come from the manufacturer.
Why Transport Routes Must Include Accessory Clearance
Institutional buyers should measure the complete patient transport route rather than assuming the trolley will fit because its basic chassis dimensions appear suitable.
Overall Trolley Dimensions
Published Length
The JH-PC101 has an overall length of approximately 2140mm.
Published Width
The specified overall width is approximately 910mm.
Side Rail Configuration
The published width with the side rails raised is approximately 880mm.
Final Installed Arrangement
The exact external envelope may change when accessories and compatible clinical equipment are installed.
Doorways and Corridors
Clear Passage Width
Measure actual doorway openings rather than relying only on nominal architectural dimensions.
Turning Space
Check the clearance needed for the complete trolley and accessory arrangement.
Wall-Mounted Equipment
Handrails, storage cabinets and other projections may reduce usable passage space.
Appropriate Handling
Caregivers should follow approved hospital transport routes and equipment-handling procedures.
IV Pole Height
Highest Installed Point
The overall height may be determined by an installed IV pole rather than the trolley itself.
Overhead Clearance
Door frames, elevator entrances and other overhead restrictions should be considered.
Clinical Equipment
Infusion containers and other connected equipment may change the complete height envelope.
Safe Adjustment
Any change to the pole position must comply with the manufacturer's and clinical operating requirements.
Central Braking and Fifth-Wheel Steering with Medical Accessories
The JH-PC101 combines four 200mm central-locking casters with a retractable fifth wheel. These mobility features must operate correctly with any approved oxygen and infusion equipment installed.
Central Braking
Four Main Casters
The trolley incorporates four medical casters with a diameter of approximately 200mm.
Coordinated Brake System
The central braking arrangement secures the designated caster system.
Before Patient Transfer
Caregivers should secure the trolley according to the approved transfer procedure.
Accessory Inspection
The oxygen cylinder and IV pole should also be checked before patient movement begins.
Retractable Fifth Wheel
Directional Guidance
The central fifth wheel provides a designated steering mode for suitable transport routes.
Free Maneuvering
When the wheel is retracted, the trolley can use the permitted movement characteristics of its main casters.
Foot-Operated Controls
Control pedals are provided on both sides of the chassis.
Accessory Interference
The fifth-wheel mechanism and its controls must remain accessible with the approved accessory arrangement installed.
Carrying Equipment Is Not the Same as Securing It
Oxygen Equipment
The cylinder must be compatible with the designated holder and its approved securing arrangement.
Infusion Equipment
The IV pole and attached devices must remain within their permitted loading and mounting requirements.
Complete Transport Procedure
Authorized staff should check both the patient-supporting equipment and relevant accessories before movement.
How the Trolley Supports a Patient Requiring Assisted Transport
The oxygen cylinder and IV pole systems are accessories to the complete JH-PC101 patient transfer trolley. The main patient-supporting functions remain essential.
320kg Safe Working Load
Published Rating
The JH-PC101 has a stated safe working load of 320kg.
Patient Support
The complete trolley must be used within its approved loading and operating conditions.
Accessory Loads
Separate accessory load ratings must also be observed.
Load Interpretation
Buyers should confirm the manufacturer's exact definition of the safe working load and the treatment of installed accessories.
Adjustable Patient Platform
Backrest Adjustment
The backrest can be positioned from approximately 0 to 85 degrees using two gas springs.
Knee Adjustment
The knee section provides approximately 0 to 40 degrees of adjustment through a manual crank.
Tilt Function
The product also specifies a platform tilt range of approximately 0 to 18 degrees.
Positioning Requirements
These functions should be used according to the relevant clinical procedure and the manufacturer's instructions.
Folding Stainless Steel Side Rails
Rail Length
The published stainless steel side rail length is approximately 1240mm.
Raised Rail Height
The side rails extend approximately 430mm above the patient-supporting platform when raised.
Bedside Access
The folding arrangement permits approved lateral access during assisted patient transfer.
Transport Configuration
Before transport, the protective rail system must be secured in the required position.
What Should Hospitals Check When Oxygen and Infusion Equipment Are Used Together?
The practical compatibility of the oxygen cylinder holder and IV pole should be assessed through a complete equipment demonstration.
Oxygen Cylinder Holder Checklist
Tray Load
Confirm the published 20kg capacity.
Cylinder Dimensions
Verify the intended cylinder diameter and length.
Securing Components
Confirm the actual manufacturer-approved retention arrangement.
Valve Protection
Review the applicable cylinder handling requirements.
Lower Chassis Clearance
Inspect the loaded holder relative to the hydraulic system and casters.
IV Pole Checklist
Supplied Pole Quantity
Verify that one IV pole is included in the standard configuration.
Four Mounting Sockets
Confirm the location and construction of every socket.
Storage Holder
Demonstrate the designated pole storage arrangement.
Maximum Pole Load
Request the approved loading specification.
Available Height
Confirm the pole's actual operating height and storage dimensions.
Combined Arrangement Checklist
Bed Height Adjustment
Check the relevant clearance throughout the permitted 630–930mm platform range.
Patient Positioning
Verify that the accessories do not interfere with approved backrest, knee or tilt functions.
Steering and Braking
Confirm access to the central brake and fifth-wheel controls.
Transport Route
Check doorways, corridors, elevators and turning areas with the actual accessory configuration.
Staff Training
Ensure that authorized personnel understand the approved equipment and clinical transport procedures.
What Should B2B Buyers Include in the RFQ?
A complete quotation request should distinguish the supplied trolley structure from the oxygen cylinder, regulator, infusion equipment and other accessories that may need separate sourcing.
Core Trolley Specification
Model Identification
Specify JH-PC101 or another approved model.
Overall Dimensions
Confirm the complete length, width and adjustment range.
Safe Working Load
Verify the 320kg published rating and relevant operating conditions.
Hydraulic System
Confirm the dual-cylinder height-adjustment arrangement.
Oxygen Support Specification
Tray Inclusion
Confirm that the integrated oxygen cylinder holder is included.
Published Tray Capacity
Record the 20kg maximum load rating.
Approved Cylinder Type
Provide the intended cylinder specifications for compatibility review.
Mounting and Retention
Request drawings and details of the approved securing arrangement.
Infusion Support Specification
Standard IV Pole
Confirm the included quantity and actual material.
Mounting Sockets
Specify the four-socket configuration.
Storage Holder
Confirm the separate storage location.
Additional Poles
Any additional pole requirements should be discussed as a separate configuration rather than assumed to be included.
Export and Service Requirements
Packaging
Request the actual packing dimensions and gross weight.
Component Protection
Confirm how the accessory holders and projecting parts are protected during shipment.
Replacement Components
Check the availability of compatible holders, IV poles, sockets and hydraulic parts.
Operating Manual
Obtain model-specific instructions covering the complete trolley and installed accessories.
Project Quantity
Identify the number of units and any required OEM labeling or compatible accessory options.
JH-PC101 Patient Transfer Trolleys from HEYUAN
Hebei Heyuan Medical Equipment Co., Ltd. supplies hospital beds, nursing beds, patient transfer equipment and related healthcare furniture for international B2B customers.
With approximately 20 years of manufacturing experience, HEYUAN supports medical equipment distributors, professional care facilities and institutional rehabilitation projects requiring suitable patient-supporting equipment.
Hydraulic Transfer Trolley with Oxygen and IV Support
20kg Oxygen Cylinder Tray
The JH-PC101 includes an integrated lower tray for compatible oxygen cylinders, subject to its approved loading and mounting requirements.
One Supplied IV Pole
The standard equipment includes one IV pole.
Four IV Pole Sockets
Multiple designated mounting points provide positioning options for the approved infusion-support arrangement.
Dedicated Pole Storage
An integrated holder provides a designated storage position when the pole is not in use.
Review the HEYUAN JH-PC101 hydraulic patient transfer trolley for the complete product configuration and technical specifications.
Compare Professional Patient Transfer Equipment
Hydraulic Transfer Trolleys
Selected models combine hydraulic height adjustment with patient positioning and accessory mounting systems.
Manual Patient Transfer Trolleys
Other configurations use mechanical height adjustment and different accessory arrangements.
Docking Transfer Systems
Specialized models allow a patient-supporting platform to move between separate trolley units at a designated transfer point.
Browse our patient transfer equipment collection to evaluate related models.
Wholesale and OEM/ODM Cooperation
HEYUAN supports suitable institutional B2B purchasing and technically feasible OEM/ODM projects. Oxygen cylinder compatibility, IV pole requirements, trolley dimensions, accessories and packaging should be confirmed according to the selected production configuration.
Our standard warranty period is one year, with covered product quality issues handled under the agreed warranty terms. Additional compatible spare parts and accessories are supplied separately according to availability and the purchasing agreement.
For technical specifications, compatible oxygen cylinder arrangements, bulk purchasing or FOB Tianjin quotations, please contact HEYUAN Medical Equipment with your required quantity, destination market and project requirements.